Conversion of film cameras to digital

Digital camera

When digital cameras became common, a question many photographers asked was whether their film cameras could be converted to digital. For the most part a conversion to digital, to give enough space for the electronics and allow a liquid crystal display to preview, would require removing the back of the camera and replacing it with a custom built digital unit.

Many early professional SLR cameras, such as the NC2000 and the Kodak DCS series, were developed from 35 mm film cameras. The technology of the time, however, meant that rather than being a digital "back" the body was mounted on a large and blocky digital unit, often bigger than the camera portion itself. These were factory built cameras, however, not aftermarket conversions.

A notable exception was a device called the EFS-1, which was developed by Silicon Film from c. 1998–2001. It was intended to insert into a film camera in the place of film, giving the camera a 1.3 MP resolution and a capacity of 24 shots. A few 35 mm cameras have had digital backs made by their manufacturer, Leica being a notable example. Medium format and large format cameras (those using film stock greater than 35 mm), have a low unit production, and typical digital backs for them cost over $10,000. These cameras also tend to be highly modular, with handgrips, film backs, winders, and lenses available separately to fit various needs.

The very large sensor these backs use leads to enormous image sizes. Medium format digitals are geared more towards studio and portrait photography than their smaller DSLR counterparts, the ISO speed in particular tends to have a maximum of 400, versus 6400 for some DSLR cameras.

Line-scan camera systems

Scan camera

A line-scan camera is a camera device containing a line-scan image sensor chip, and a focusing mechanism. These cameras are almost solely used in industrial settings to capture an image of a constant stream of moving material. Unlike video cameras, line-scan cameras use a single array of pixel sensors, instead of a matrix of them. Data coming from the line-scan camera has a frequency, where the camera scans a line, waits, and repeats. The data coming from the line-scan camera is commonly processed by a computer, to collect the one-dimensional line data and to create a two-dimensional image. The collected two-dimensional image data is then processed by image-processing methods for industrial purposes.

Line-scan technology is capable of capturing data extremely fast, and at very high image resolutions. Line-scan-camera–based integrated systems, therefore are usually designed to streamline the camera's output in order to meet the system's objective, using computer technology which is also affordable.

Line-scan cameras intended for the parcel handling industry can integrate adaptive focusing mechanisms to scan six sides of any rectangular parcel in focus, regardless of angle, and size. The resulting 2-D captured images could contain, but are not limited to 1D and 2D barcodes, address information, and any pattern that can be processed via image processing methods. Advanced integrated systems include video coding and optical character recognition (OCR).

Professional modular digital camera systems

Modular digital

This category includes very high end professional equipment that can be assembled from modular components (winders, grips, lenses, etc.) to suit particular purposes. Common brands include Hasselblad and Mamiya. They were developed for medium or large format film sizes, as these captured greater detail and could be enlarged more than 35 mm.

Typically these cameras are used in studios for commercial production; being bulky and awkward to carry they are rarely used in action or nature photography. They can often be converted into either film or digital use by changing out the back part of the unit, hence the use of terms such as a "digital back" or "film back".

Digital rangefinders

rangefinders

A digital rangefinder is a user-operated optical mechanism to measure subject distance once widely used on film cameras. The term rangefinder alone is sometimes used to mean a rangefinder camera, that is, a film camera equipped with a rangefinder, as distinct from an SLR or a simple camera with no way to measure distance.

Digital Single Lens Reflex Cameras

DSLRs

Digital single-lens reflex cameras (DSLRs) are digital cameras based on film single-lens reflex cameras (SLRs), both types are characterized by the existence of a mirror and reflex system.

Bridge Cameras

Bridge cameras

Bridge cameras or SLR-like cameras are higher-end digital cameras that physically resemble DSLRs and share with them some advanced features, but share with compacts the framing of the photo using live preview and small sensor sizes.

Bridge cameras often have superzoom lenses which provide a very wide zoom range, typically between 10:1 and 18:1, which is attained at the cost of some distortions, including barrel and pincushion distortion, to a degree which varies with lens quality. These cameras are sometimes marketed as and confused with digital SLR cameras since the appearance is similar. Bridge cameras lack the mirror and reflex system of DSLRs, have so far been fitted with fixed (non-interchangeable) lenses (although in some cases accessory wide-angle or telephoto converters cannot be attached to the lens), can usually take movies with sound, and the scene is composed by viewing either the liquid crystal display or the electronic viewfinder (EVF). The high-end models of this type have comparable resolutions to low and mid-range DSLRs. Many of these cameras can store images in lossless RAW format as an option to lossy JPEG compression. The majority have a built-in flash, often a unit which flips up over the lens. The guide number tends to be between 11 and 15.

Compact Digital Cameras

Compact cameras

Compact cameras are designed to be small and portable; the smallest are described as subcompacts or "ultra-compacts". Compact cameras are usually designed to be easy to use, sacrificing advanced features and picture quality for compactness and simplicity; images can usually only be stored using Lossy compression (JPEG). Most have a built-in flash usually of low power, sufficient for nearby subjects. Live preview is almost always used to frame the photo. Compacts often have macro capability, but if they have zoom capability the range is usually less than for bridge and DSLR cameras. They have a greater depth of field, allowing objects within a large range of distances from the camera to be in sharp focus.

Video Cameras

Video cameras

Video cameras are classified as devices to record moving images.

Professional video cameras such as those used in television and movie production. These typically have multiple image sensors (one per color) to enhance resolution and color gamut. Professional video cameras usually do not have a built-in VCR or microphone.

Camcorders used by amateurs. They generally include a microphone to record sound, and feature a small liquid crystal display to watch the video during taping and playback.

Webcams are digital cameras attached to computers, used for video conferencing or other purposes. Webcams can capture full-motion video as well, and some models include microphones or zooms ability.

Digital Camera

Digital Camera

A digital camera is a camera that takes video or still photographs, or both, digitally by recording images on a light-sensitive sensor. In the Western market, digital cameras outsell their 35 mm film counterparts.^[1]

Digital cameras are incorporated into many devices ranging from PDAs and mobile phones (called camera phones) to vehicles. The Hubble Space Telescope and other astronomical devices are essentially specialised digital cameras.

Classification Digital Camera:

1. Video Cameras

2. Campact digital cameras

3. Bridge cameras

4. Digital single lens reflex cameras

5. Digital rangefinders

6. Profesional modular digital camera systems

7. Line-scan camera systems